SWITCHGEAR BOARD

SPECIFICATIONS

We offer complete line-up of switchgear & controls ranges from single generator through multiple generator applications including standby power, prime power, distributed generation, peak shaving, and utility paralleling.

 

Our switch gear is designed and built in compliance with reference Standards that define its constructional and functional characteristics. In particular, the IP66 degree certifies that protecting against the infiltration of solid bodies and isresistant to the penetration of jets of water similar to sea waves.

 

LOW VOLTAGE SWITCHGEAR

Designs and manufactures one of the most complete lines of low voltage switchgear (600v and below) inthe industry and it is available with main bus ratings up to 9,000 Amps.

Feature:

  • Standard: IEC 60439-1.
  • Rated Insulation Voltage: 1000VAC.
  • Rated Operational Voltage: 690VAC.
  • Rated Impulse Withstand Voltage: 12kV.
  • Degree of Pollution: 3.
  • Frequency: 50Hz.
  • Main Busbars: up to 6300A.
  • Rated Peak Withstand Current: 220kA.
  • Rated Short-time Current: 100kA / 1s.
  • Degree of Protection: up to 54.
  • Material: Electro- Galvanized Steel Sheet.
  • Metal Sheet Thickness: 2mm.
  • External Surface Protection: Epoxy Powder Polymerized at High Temperature.
  • Painting Thickness: more than 50 micro mm.
  • Standard Color: RAL 7032, 9002

 

MEDIUM VOLTAGE SWITCHGEAR

Our medium voltage portfolio will help protect and control medium voltage switchgear equipment in commercial, industrial and utility applications worldwide.  While reliability throughout all our medium voltage switchgear products is key to a successful installation, continued innovation and engineering excellence enable us to help customers solve the most extreme of medium voltage switchgear challenges

Feature:

  • The voltage ranges are 3.6kV - 7.2kV – 15kV and current ratings up to 1250A.
  • The switching devices are of fixed or withdrawable type.
  • The switchgear is designed for modular concept.
  • The switchgear is designed flexibly, it can be installed the switching devices of almost brands.
  • Protection level: IP3X for the enclosure in accordance with IEC 60529. IP2X between each compartment
  • Material: Electro- Galvanized Steel Sheet.
  • Metal Sheet Thickness: 2mm.
  • External Surface Protection: Epoxy Powder Polymerized at High Temperature.
  • Painting Thickness: more than 50 micro mm.
  • Standard Color: RAL 7032, 9002